Fender American Professional II Jazzmaster review and prices (2023)

Is the Fender American Professional II Jazzmaster a Good Deal?

Your competitor's average price is $3,600, which meansthe Fender American Professional II Jazzmaster is about 50% cheaper than the competition.This accounts for all guitars in the same category in our database that have 6 strings and a USA made tremolo bridge.

Discover all Fender guitars >

Is the Fender American Professional II Jazzmaster easy to play?

The Fender American Professional II Jazzmaster meets 6 of our 8 entry-level compatibility criteria, that isIt's a good guitar to start with as a complete beginner.It takes into account fret type, scale length, nut width, bridge type, neck radius, and neck profile to determine the easiest combination that new players will become accustomed to.

Hand-sized comfort

After considering the neck profile, fretboard size, neck radius and nut width, we can conclude the construction of the Fender American Professional II Jazzmasteris balanced for most hand sizes.

However, this ultimately comes down to personal preference. Make sure you try this guitar or one with similar characteristics before you buy it.

scale length

The scale length is the distance the strings travel between the bridge and the nut. They can tell a lot about the overall playability and tone of the instrument. A longer scale length means more spacing between the frets, a brighter tone, and more tension on the strings, which means less action but more string flex.

Here is the Fender American Professional II Jazzmaster25,5"Scale compared to other common sizes:

This is the same scale length used on Stratocaster guitars and is one of the main reasons they sound so bright.🇧🇷 Compared to most non-baritone guitars, it is considered a long scale.

Since the distance between the bridge and the nut is relatively large, you have to tighten the strings to tune them. This higher voltage will enable a few things. First, you can get a lower action (move the strings closer to the fretboard) because the strings don't "jitter" as much when you play and don't cause fret buzz.This allows you to use lower tunings without increasing the gauge of the strings and makes it easier to press the strings quickly.

However, the frets will also be further apart, which can make it difficult to play, especially if you have small hands. Higher tension also makes the strings feel stiffer, requiring more force to bend.

neck profile

The neck profile provides information about the thickness (depth of the neck) and the shape in cross section. Any difference will completely change the feel and comfort of your neck. This is very subjective, but most players actually prefer certain types of weapons (like Cs and Ds) because they feel good in most hands.

The neck thickness of the Fender American Professional II Jazzmaster is approximately 0.8 inches (20.3 mm) at the 1st fret and 0.92 inches (23.4 mm) at the 12th fret..

These measurements were obtained from the official Fender website or, if this information was not provided, by researching various marketplaces and online forums where owners of this model have posted their measurements.

fretboard radius

When it comes to arm radius, which one works best for you depends on personal preference. However, most people seem to agree that a more curved (smaller) radius makes it easier to play chords, while a less curved (higher) radius is better for solos and curves.

The Fender American Professional II Jazzmaster has a 9.5 inch fretboard radius🇧🇷 Here is a picture that compares the fretboard radius of this guitar to other popular picks:

This is the most common radius for Stratocaster guitars. It is considered curved compared to most other models. Thisallows you to play chords very easily without accidentally muting the strings and gives you more space between the strings to strum🇧🇷 However, this curve also gives the guitar less leeway for lower string action. Bending the high frets too much may dampen some of your notes as the string tightens as it bends.

Compound radius scales offer the best of both worlds. Unfortunately, the Fender American Professional II Jazzmaster has the same radius throughout the lineup.

nut width

The Fender American Professional II Jazzmaster has a nut width of 42.8 mm (1,685''). This size is also referred to as 1 11/16'' and is the most common size. Provides a good balance of string spacing at the saddle. It's the preferred size for most guitarists as it gives them enough room to play open chords without muting the strings, but without opening the strings too wide and making bars difficult to play.

trouble

The Fender American Professional II Jazzmaster has 22 frets. Although 24 frets have become very popular, there is still a good reason for fewer frets; The pickup in the neck position is furthest from the bridge.This gives the neck pickup a warmer tone.🇧🇷 You might want this if you play jazz or similar genres.

However, if you don't care about the best neck pickup, then more frets are always better. It's always nice to have the option to play higher notes if you want to.

It comes with nickel silver frets so they don't last that longstainless steel frets🇧🇷 If you use your instrument a lot, you may need to replace the frets after a few years. However, this is unlikely as most people switch instruments before this happens.

waistband size

Finally, let's talk about waistband size. Some people prefer the higher frets because it's easier to press the strings and make bends since there's less friction against the fretboard. On the other hand, some people like shorter frets because they like to hit the fretboard while playing, or because they have heavy hands and tend to press the string too hard and accidentally change the pitch of the note.

The frets of the Fender American Professional II Jazzmaster are narrow and high.🇧🇷 They are similar to the Jumbo but can be slightly shorter (or taller depending on the manufacturer) and tend to have a narrower crown width. You can press the strings lightly, but if you're not used to it, you could lose notes if you press the strings too hard, since the height of the strings doesn't allow you to feel the fretboard.

score

Does the Fender American Professional II Jazzmaster sound good? Tom's analysis

The wood has little effect on the final tone of an electric guitar. Instead, the hardware, particularly the pickups, will be the most important thing to consider. But let's look at the quality of the wood first.

delivery trucks

This guitar comes with pickups from one of the best brands: Fender🇧🇷 So you can expect great sounding, well built pickups that shouldn't need an upgrade any time soon.

These are passive pickups, so you can expect a moderate level of warm output rather than the overwhelming output that distinguishes active metal pickups.

The Fender American Professional II Jazzmaster configuration is SS🇧🇷 This is the classic Telecaster setup and is mainly used for playing clean or with low gain distortion. It doesn't offer as much versatility as a Strat SSS setup, but you might like the cleaner look of a guitar body with fewer pickups.

versatility

It comes with the popular 3-way switch that most guitars have.🇧🇷 Guitarists usually prefer a 5-way switch for versatility, although it all depends on how you intend to use your guitar.

Features an S-1 switch option🇧🇷 This is a button that can make many different changes to the truck wiring. You can add pickups in series, parallel, split or add more pickups to the mix. It depends on the guitar model.

diagram

What genre of music is the Fender American Professional II Jazzmaster suitable for?

As a 6-string solid body guitar with SS configuration and passive pickups,We recommend for genres like jazz or similar.🇧🇷 However, you can use almost any guitar for any genre. That's just the typical type of music for this type of guitar.

sound sheet

How well built is the Fender American Professional II Jazzmaster?

Where is the Fender American Professional II Jazzmaster made?

Knowing where the guitar is made is a good way of telling how well built it is. Some manufacturing countries are known to have higher quality standards. For example, the most expensive guitars are made in the US or Japan, but there are some exceptionally good countries like South Korea that are building a solid reputation.

The Fender American Professional II Jazzmaster is made in the United States.🇧🇷 American-made guitars have a reputation for being the best instruments you can get. While that statement isn't as true as it was a few years ago, you should still expect high quality from a guitar made here.

Ponte

Jazzmaster/Jaguar bridge with 9.5" spoke and PanoramaTM tremolo system:This type of bridge allows you to change the pitch of notes by dragging the bridge down with the bar, giving you more versatility. Since the bridge is not attached to the body of the guitar, the bridge will also move when you bend the strings. So you need to increase the spacing of your bends to achieve the same tension (note) compared to a solid bridge. This will allow you to make smoother turns, but will also slow you down. Finally, keep in mind that this type of bridge requires a little more maintenance than fixed bridges, especially when changing strings.

walnut material

Another important consideration is the nut material, as it is one of the most important aspects that can affect the tone and playability of your guitar. A well-tailored saddle keeps the guitar in tune and makes it more comfortable to play.

Then,the Fender American Professional II Jazzmaster has a bone saddleThis material is the highest quality you can get. Provides excellent sustain and tuning stability when properly cut. The only downside is that it's an organic material so it's not consistent. Two different bone nuts, even if they are made from the same bone, are likely to sound slightly different. Note, however, that this is only relevant when playing open strings.

neck joint

The neck joint is the part where the guitar's neck meets the body. There are three main techniques to connect the two parts: Set-In, Bolt-On, and Neck-Through. The latter two offer different benefits, although neck-throughs are the most expensive.

This guitar has a bolted neck joint.🇧🇷 While this type of arm has long been overlooked, today bolt-on arms are well constructed and offer as much buoyancy as any other method of attachment. First, it's cheap to make as it's just 4 screws that attach the neck to the body. And you can travel with the guitar more easily, swap out the neck if it becomes damaged, or upgrade to a more comfortable neck later.

Create Quality Score

Most popular comparisons to the Fender American Professional II Jazzmaster